CLM Pro | RC models | RC gliders | Sailplane | Fuselage set | Pod | electric pod | Carbon Accessories | F5J | F3J | Ales | Slope | F3K | DLG | HLG | Kit | ARF |
Poraver® 1-2 mm 0.23 g/cm³.
Packaging of 500 gr.
Lightweight filler for epoxy, polyester, and polyurethane resins
Poraver® is manufactured from recycling glass. In a special process the raw material is expanded in a rotary kiln at 900 °C. This expansion process gives rise to a finely pored, cream-coloured spherical granulate enclosing fine air voids. Due to its host of positive product properties, Poraver® is outstandingly suitable for processing with organic binders. This makes constantly new applications possible in polyurethane, acrylate, epoxy, polyester, phenol and other resins. Very high filler contents are achieved in these systems with Poraver® (up to over 90 %). Due to its extremely low weight, Poraver® is particularly suitable for applications involving light-weight construction.
Applications:
For manufacturing lightweight pouring and filler compounds. Also suitable for lightweight mould construction.
Characteristics:
Lightweight, compression-resistant, high heat insulation, weather- and alkali-resistant, nonflammable, free of solvents
Technical data:
Colour: cream
Particle size: 1–2 mm
Apparent particle density: approx. 390 kg/m³)
Apparent density: approx. 230 kg/m³ = approx. ca. 0.23 g/cm³
Particle strength: approx. 1.6 MPa
Quantity added to resin: any
Mechanical properties (Volume content of the foam glass granulate is between 50 and 60 %):
Density: 0.73 g/cm³
Tensile modulus: 3367 MPa
Poisson`s ratio: 0.32
Tensile strength: 9.1 MPa
Compressive strength: 19.1 MPa
Flexural strength: 19.1 MPa
Thermal conductivity: 0.155 W/(mK)
© Copyright 2018 by CLM-Pro