CLM Pro biggest fuselage! Electric fuselage set suitable for wingspan up to 4 meters / 157". Set contains electric aramid pod, carbon tailboom, V-mount and complete tail. 2.4 GHz friendly. ALES, F5J.

CLM Pro biggest fuselage! Fuselage set suitable for wingspan up to 4 meters / 157". Set contains aramid pod, carbon tailboom, V-mount and complete tail. 2.4 GHz friendly. ALES, F5J.

This fuselage set is designed so that it has beautiful aerodynamic lines, is easy on the eyes and, most importantly, possesses excellent flight characteristics. The pod is large and strong enough to easily carry 4-meter / 158" wings. The fuselage pod #133 can be used for various purposes in various categories, such as F5J, F3J, ALES and other homebuild projects or replacements for a pre-existing model.

Set contains aramid pod, carbon tailboom, V-mount and completed tail.

Set weights 336 grams / 11.85 oz.

Carbon tailboom is 1010 mm / 39.76" long and weights 65g / 2.29 oz.

Carbon tail boom is made from several carbon types. Materials are strategicaly positioned so the boom is of its maximum strength and minimum weight.

Carbon V-mount has ID of 18 mm / 0.70" and weights 6 grams / 0.21 oz.
You get few different bolts with it.

The pod is completely made of composites (multiple types of materials), mainly aramid, and has carbon fiber reinforcements on strategic spots, giving it additional strength to endure heavier straining. It is, of course, 2.4 GHz friendly. It is strong enough to withstand even hardcore landings and other forces. Pylon is also reinforced, just like the top of the nose, so it can be landed roughly.

The canopy is designed in a way that there is enough space to easily manipulate all the components in the pod, allowing the battery to be inserted and connected easily, improving usability on the field. The edges around the canopy are also reinforced with carbon.
It is supplied with a removable carbon canopy.

The pylon is 184 mm / 7.24" long i additionally strengthened with multiple carbon types and layers, so the wings may be up to 260 mm / 10.23" in depth, but even larger ones can be mounted. Dihedral angle of pylon is 2.5° on each side.

This pod is suitable for wingspans of up to 4 meters / 158". It is ideal for home builders, as it can be used as a replacement pod for other projects, too.

The standard pod version is in white, i.e. coated with gel coat, which is UV stable and wear-resistant.

Tailboom suitable for this pod: Carbon tailboom #222 and extra strong #223.

The tail is made as a constructin of laser cut ribs covered with carbon cap strips and additional carbon reinforcements which gives it great strength. It is also made with carbon main spar and trailing edge.

Vertical stabilizer is made the same way and it already has a built in kevlar hinge.

Complete tail is covered with Oracover - Light Oralight foil.

The tail is also prepared to be mounted on our V-Mount. It has a slot and the V-Mount simply slides into it and you only need to fasten them together with a screw.

Tail specifications:

Horizontal stabilizer:
Span: 660mm , 143mm chord on the middle and 111mm on the tip.
Weight: 42g / 1.48oz

Vertical stabilizer:
362mm height. Lower part widts is 216mm, and upper part width is 105mm. Bottom part of the tail is located 80mm below the boom. There is enough space inside the vertical stab to install servos.
Weight: 55g / 1.94oz

NOTE:
The pod #133 is designed so that it can be converted into an electric version.
Being that the nose is additionally strengthened, it can be cut off at a certain length to achieve the required diameter. To install a motor for the electro version, you only need to glue a firewall and it is done.

NOTE2:
If you require a pod version which is lighter or much stronger than the standard one, simply contact us and we can make a custom one for you. This also goes for the selection of materials.