CLM Pro | RC models | RC gliders | Sailplane | Fuselage set | Pod | electric pod | Carbon Accessories | F5J | F3J | Ales | Slope | F3K | DLG | HLG | Kit | ARF |
High quality Carbon fabric 285 g/m², 8.4 oz/yd² – 3K twill 4T cloth - sample A4. The material is thick, opaque and compact in the middle. Fantastic designer look.
It is only an sample of the material, A4 20x30cm / 11.81“x7.87“
This is a unique looking cloth used in all aspects of motor sport and marine applications. Compatible with Epoxy and Polyester Resins. This cloth has good drape-ability, is easy to handle and is used in Vacuum Bag techniques, Resin Infusion and Hand Lay – up.
Application:
Modelling, motor sports, sport equipment, ship construction. Rigidity and extreme resistance to pressure due to carbon fibre. Impact strength, tensile strength.
Material as per aircraft standards.
If you a interested you can also get sheet by your desired dimensions.
Specification: |
||
|
Nominal |
Tolerance: |
Fiber: |
Carbon fabric 285 g/m², 8.4 oz/yd² |
|
Fibre description |
3K T300 carbon fiber |
|
Weight: |
285 g/sqm || 8.4 oz/yd² |
± 3% |
Thickness: |
0.32 mm |
± 2 % |
Weave: |
Twill 4x4 |
|
Width: |
100 cm |
|
Tensile strength (MPa): |
3530 |
|
Tensile modulus (GPa): |
230 |
|
Elongation at break (%): |
1.5 |
|
Binder: |
Copolyamide 6 g / sq.m, 2% |
Warp – Weft ratio: |
||
|
Warp |
Weft |
Fibre description: |
3K T300 carbon fiber |
3K T300 carbon fiber |
Thread count (ends/cm): |
7 |
7 |
Weight distribution (g/mq): |
142.5 |
142.5 |
Weight distribution (%): |
49 |
49 |
Yarn number: |
200 tex |
200 tex |
Binder description: |
Copolyamide non woven, heat treated |
|
Binder (g/mq) |
6 |
|
Binder % |
2 |
© Copyright 2018 by CLM-Pro