CLM Pro | RC models | RC gliders | Sailplane | Fuselage set | Pod | electric pod | Carbon Accessories | F5J | F3J | Ales | Slope | F3K | DLG | HLG | Kit | ARF |
RedFox baby is a high quality electirc motor with gearbox. Its used for F5J models where high performance is crucial, which is one of the reasons its also used for competitions.
This powertrain can be used for models up to 1200gr. The power unit is capable of delivering 500W constant power. The unit has a gear ratio of 4.7:1, featuring 3 planetary gear sets and ball bearings.
At about 900gr model weight, the climb rate is 15 - 17 m/s, and with 1200gr model weight, the climb rate is 11 - 13 m/s. The data is calculated with 3S 500mAh LiPo batteries.
RedFox BABY 5 specifications:
Measurements: diameter 23 mm, lenght 44 mm (without shaft)
Shaft: diameter 5 mm, lenght 14 mm
Weight: 68 g (with wires and connectors)
Gear ratio: 4,70:1 (3 planets with BB)
Optimal power in with 2S LiPOL and propeller 13/5“
Timing: 0° 10° 20° 30°
Power : 22 A 23 A 24 A 25 A
Thrust : >750 g >800 g >850 g >900 g
Recommended ESC: 25-45 A (e.g. CC Talon 35, SPIN 44)
Recommended accu: 2S 500-1300 mAh (more than 45C)
Max power in with 3S LiPOL (timing 0°) and next propellers:
- 10/6" prop ................... 24 A .................. >630 g (static thrust)
- 11/4“ prop ................... 27 A ................... >920 g (static thrust)
- 11/6“ prop ................... 35 A .................... >980 g (static thrust)
Recommended ESC: 35-45 A (e.g. CC Talon 35, SPIN 44)
Recommended accu: 3S 850-1300 mAh (more than 45C)
Suitable spinner complete HT30(32)-36 or HT30(32)-32:
© Copyright 2018 by CLM-Pro